Press Brake Dies and Tooling; Metal Forming & Bending Press Brake Dies and Tooling; Metal Forming & Bending
 

"Save Time
& Money"

"Easy to Use!"

 

 

 

Press Brake Dies and Tooling; Metal Forming & Bending Press Brake Dies and Tooling; Metal Forming & Bending
Press Brake Dies and Tooling; Metal Forming & Bending
 

Perfect Forms

Why Perfect Form Red
Urethane Works better?

Created using the finest and most pure
urethane compounds. These compounds
cost more money than the normal urethane
products used by our competition.

Manufactured under contract in the USA
at a world class facility with staff PHD
educated R&D technicians who assist
and monitor production. Quality and a
consistent product.

The urethane is actually a higher
durometer than other forming urethanes.
Due to the purity of materials, it remains
tough and ductile with a "blended in"
additive for its slick lubricated feel.

Available in a variety of thicknesses and
any width up to 36" wide. Perfect Form red urethane is able to handle any application
that fits your needs.

How to Use Perfect Form Red
Urethane in a Press Brake

Cut a strip of "Red" to the length desired.
Lay or drape the urethane over the vee
die with equal amounts hanging over the
shoulders of the die opening.

Place part to be formed on top of the
urethane and cycle press stroke as you
normally run parts.

Urethane can be secured to front or
back of lower die with double stick tape,
duct tape or magnets. Let urethane
hang down awayfrom vee die when
perfect scratch free bends are
not required.

Please note: Due to the thickness of the
urethane being used you may need to
reduce the press shut height by .010" - .015"
on the urethane that is .022" thick. This adjustment will be greater .018" up to .028"
on the thicker .031" thick red urethane.

  Press Brake Dies and Tooling; Metal Forming & Bending
Perfect Form Urethane Products
(Roll Width +/- 1/4")

4" X 100 ft roll length
.022" thick
Part # PF4-22
$150 Each

6" X 100 ft roll length
.022" thick
Part # PF6-22
$230 Each

4" X 100 ft roll length
.031" thick
Part # PF4-31
$210 Each

6" X 100 ft roll length
.031" thick
Part # PF6-31
$315 Each

 

Thicker and wider urethane available upon request.

PerfectForm: Urethane for metal forming,
bending, tooling for press brake dies;
Bending metal without tool marks.